I've been getting a lot of questions about how I turn my sketches into full paintings. So I decided to make a step by step tutorial on my process. I use a transfer rub method using tracing paper. It can get a little tedious but I prefer it to using a projector because I feel like the transfer is a little more precise.
First I make sure that I have all the tools that I need to make a transfer sheet. To transfer this piece I'll be using the original sketch, a lightbox, tracing paper, a soft lead mechanical pencil, a hard lead drawing pencil, a blending stump and the prepped wood panel that I will be transferring the sketch to.
To make the transfer sheet I flip the original sketch (drawing side down) onto the light box, place a sheet of tracing paper over it and begin to trace. I like to use a mechanical pencil with a soft lead for this part for two reasons: a softer lead will transfer easier and a mechanical pencil will keep the line work consistent without having to sharpen it. When making the transfer sheet, I try to keep the lines as simple as possible to make the transfer clean and easy. When I'm done tracing I end up with a reversed, line drawing copy of the original sketch.
Once the tracing paper transfer sheet is made, I flip it back over (pencil side down) onto the wood panel. I secure it with masking tape to make sure that it doesn't slip or shift during the transfer. I use a blending stump to rub over the entire drawing to transfer the pencil lines onto the wood panel. When the transfer is finished, the lines left on the wood panel are usually somewhat faint and can wipe off fairly easy so I go over the entire drawing with a hard lead drawing pencil (I use a 4H) to secure the image.
Now that the transfer is done, I clean up any lines or mistakes and then I'm ready to paint. I like to keep the original sketch nearby to use as a value study so I know where all of the shadows and highlights will be.
And that's about it. Thanks for stopping by and I hope this answered some of your questions. Keep in mind though, there are many ways to transfer a sketch to another surface to get it ready for paint. This is just the method I prefer. Take care everyone! Until next time!